PÓNGASE EN CONTACTO CON NOSOTROS AHORA PARA RECIBIR UN PRESUPUESTO RÁPIDO, SOPORTE DE MUESTRAS Y GARANTÍA DE SERVICIO DE INGENIERÍA.
Productos
Vestíbulo de edificio de oficinas Techo metálico lineal
Why choose a linear ceiling for a lobby instead of a flat panel system?
Scale is usually the deciding factor. Lobbies often have taller ceiling volumes than the floors above them, and a flat panel grid at that height can read as visually flat and distant — a linear strip pattern gives the eye a sense of direction and proportion across a large overhead volume in a way a repeating square grid doesn't, which is part of why linear ceilings show up so often in double-height or atrium-style lobby designs.
What happens where the lobby ceiling meets a lower corridor or elevator lobby ceiling?
This transition point is one of the more overlooked design details in lobby ceiling planning. Strip runs generally don't just stop abruptly at a height change — the layout is planned so the linear pattern either continues at a reduced scale into the adjacent space or terminates at a clean architectural break, like a bulkhead or change in ceiling material, rather than creating an awkward half-finished strip run at the boundary.
Can the strip direction follow a curved or angled lobby layout?
Standard strip runs are straight, but layout can follow the dominant geometry of the space — radiating from an entrance point, following a curved reception desk, or aligning with the building's primary circulation path — even when the lobby itself isn't a simple rectangle. This needs to be planned against the architectural floor plan rather than assumed to default to one direction.
¿Busca techos y fachadas de aluminio a medida? Hablemos
Escaparate de aplicaciones de productos
What finish and strip width are typically used in lobby applications?
Wider strips with tighter groove spacing are common in lobbies specifically because they read as more solid and finished from a distance, which suits the premium first-impression role a lobby ceiling usually plays — narrower strips with more visible groove are used less often here than in back-of-house or purely functional linear ceiling applications.
How does lighting typically integrate with a lobby strip ceiling?
Cove lighting, linear LED runs, and feature pendant fixtures are all commonly planned around the strip layout at the drawing stage, with strip direction often aligned to either reinforce or intentionally contrast with the lighting design, depending on whether the goal is a seamless integrated look or a more layered architectural effect.
Does the entrance vestibule need a different ceiling treatment than the main lobby?
Often yes. Entrance vestibules typically see more direct weather exposure and higher foot traffic concentration than the lobby interior, so a slightly different coating or finish grade is sometimes specified for that specific zone even when the overall strip pattern continues visually from the vestibule into the main lobby space.
Instalación del producto
Instrucciones de instalación del techo de tiras de aluminio
- Install the hanger rods according to the ceiling layout, keeping all suspension points at the same horizontal level to prevent the strip line from sagging or twisting along its run.
- Fix the main runners securely, then position the carrier rails (or cross-tees) to match the strip spacing and module width specified in the layout drawing.
- Check and adjust the entire frame so the carrier system is level, straight, and square before any strips are hung, since misalignment at this stage will show clearly along a continuous linear run.
- Insert the aluminum strips into the carrier rail one section at a time, working in the correct sequence so each strip locks flush against the next and the gap width stays consistent along the full run.
- Prepare cut-outs and reserved positions for light fixtures, air diffusers, sprinklers, or access panels before or during installation, and use matching trim or closure strips at these openings to keep the line unbroken.
- After all strips are installed, sight down the full run to check for consistent gap spacing, straight alignment, and secure connections, confirming a flat, continuous, and properly finished ceiling line.
The patterns shown here are only part of what’s available in aluminum strip ceiling systems. Strips can be specified as flat, perforated, micro-perforated, or grooved profiles, in open or closed-gap configurations, with or without acoustic backing fleece behind the perforation.
These options are matched to project needs for acoustic control, airflow, lighting coordination, ease of plenum access, and the overall visual rhythm of the ceiling. Strip profile, width, perforation pattern, gap size, and edge return can be customized according to project drawings and design requirements.
The colors shown here represent only part of the available finish options for aluminum strip ceiling systems. A wide range of standard and custom colors is available to support different interior styles, from clean transit and office environments to decorative commercial and hospitality spaces.
Finishes are selected to complement lighting design, coordinate with wall and floor materials, and meet the practical demands of high-traffic public spaces. Whether the project calls for classic white, black, silver, wood grain, or a custom brand color, finish options can be matched to the design intent of the space.
Project-based color selection and custom matching are supported for aluminum strip ceiling systems, helping designers, contractors, and developers align the ceiling finish with the broader architectural palette.
It can work in either, though the visual benefit is most pronounced in taller volumes. In lower-height lobbies, strip width and groove spacing are usually adjusted to keep the ceiling from feeling visually busy at a closer viewing distance.
This is planned explicitly at the layout stage — the strip pattern either continues at a reduced scale into the adjacent space or terminates at a clean architectural break, rather than being left as an unplanned condition to resolve during installation.
Yes, layout can be planned to follow the dominant geometry of the space, but this needs to be coordinated against your architectural floor plan in advance rather than defaulting to a standard straight orientation.
Often a slightly different coating or finish grade is specified for the vestibule given its higher weather exposure and traffic concentration, even when the strip pattern reads as visually continuous from the vestibule into the lobby.
Cove lighting, linear LED runs, and pendant fixtures are usually planned against the strip layout at the drawing stage — strip direction can be aligned with the lighting for a seamless look, or intentionally offset for a more layered architectural effect, depending on the design intent.
