СВЯЖИТЕСЬ С НАМИ ПРЯМО СЕЙЧАС, ЧТОБЫ ПОЛУЧИТЬ БЫСТРУЮ СМЕТУ, ПОДДЕРЖКУ ОБРАЗЦОВ И ГАРАНТИЮ ИНЖЕНЕРНОГО ОБСЛУЖИВАНИЯ.
Продукция
Алюминиевая линейная потолочная система для коммерческих офисов
Linear ceilings get chosen for offices for a reason that's easy to miss if you only think of them as a decorative alternative to a standard grid: they solve a specific visual problem that a panel ceiling can't. A large open-plan floor covered in a 600×600mm grid produces a repeating pattern of horizontal and vertical lines across the entire ceiling plane — functional, but visually busy at scale, and it fights against the continuous linear lighting runs that most modern open-plan lighting designs now specify. A strip ceiling removes the cross-grid entirely. What's left is a single directional line that lighting can run parallel to, rather than a grid the lighting has to work around.
Dingchengzun's aluminum linear ceiling system for commercial office interiors is specified across open-plan floors, corridors, and reception approach areas where this directional simplicity matters more than the finish uniformity a flat panel ceiling provides. It's a different tool than the clip-in or tegular systems used elsewhere in an office fit-out, not a premium or budget alternative to them — the linear system is the right choice specifically when continuous lighting integration and a reduced visual grid are the design priority, and the panel systems remain the better fit for enclosed offices and conference rooms where a flush, uniform surface matters more.
The groove pattern between strips also does real acoustic work, not just visual — an open groove with backing behind it absorbs sound similarly to a perforated panel, which matters in open-plan floors where the strip ceiling is covering a large uninterrupted span with no partition walls to break up reverberation.
Ищете алюминиевые потолки и фасады на заказ? Давайте поговорим
Витрина применения продукции
Strip width and groove spacing are the two decisions that actually shape how the finished ceiling reads. Wider strips with tighter grooves produce a more solid, continuous line that reads almost like a flat surface from a distance; narrower strips with wider grooves show more of the plenum above and read as more open and industrial — the choice usually comes down to whether the space is meant to feel more polished and corporate or more exposed and contemporary. Coating and color follow the same range as the rest of an office ceiling specification, and strip runs can be planned to align directly with linear LED fixtures so the lighting appears to be part of the ceiling structure rather than mounted onto it.
Because a linear ceiling doesn’t use a full grid, layout planning happens earlier in the process than it would for a panel system — strip direction, run length, and lighting alignment need to be settled before installation rather than adjusted panel by panel afterward.
Установка продукта
Инструкция по монтажу алюминиевого ленточного потолка
- Install the hanger rods according to the ceiling layout, keeping all suspension points at the same horizontal level to prevent the strip line from sagging or twisting along its run.
- Fix the main runners securely, then position the carrier rails (or cross-tees) to match the strip spacing and module width specified in the layout drawing.
- Check and adjust the entire frame so the carrier system is level, straight, and square before any strips are hung, since misalignment at this stage will show clearly along a continuous linear run.
- Insert the aluminum strips into the carrier rail one section at a time, working in the correct sequence so each strip locks flush against the next and the gap width stays consistent along the full run.
- Prepare cut-outs and reserved positions for light fixtures, air diffusers, sprinklers, or access panels before or during installation, and use matching trim or closure strips at these openings to keep the line unbroken.
- After all strips are installed, sight down the full run to check for consistent gap spacing, straight alignment, and secure connections, confirming a flat, continuous, and properly finished ceiling line.
The patterns shown here are only part of what’s available in aluminum strip ceiling systems. Strips can be specified as flat, perforated, micro-perforated, or grooved profiles, in open or closed-gap configurations, with or without acoustic backing fleece behind the perforation.
These options are matched to project needs for acoustic control, airflow, lighting coordination, ease of plenum access, and the overall visual rhythm of the ceiling. Strip profile, width, perforation pattern, gap size, and edge return can be customized according to project drawings and design requirements.
The colors shown here represent only part of the available finish options for aluminum strip ceiling systems. A wide range of standard and custom colors is available to support different interior styles, from clean transit and office environments to decorative commercial and hospitality spaces.
Finishes are selected to complement lighting design, coordinate with wall and floor materials, and meet the practical demands of high-traffic public spaces. Whether the project calls for classic white, black, silver, wood grain, or a custom brand color, finish options can be matched to the design intent of the space.
Project-based color selection and custom matching are supported for aluminum strip ceiling systems, helping designers, contractors, and developers align the ceiling finish with the broader architectural palette.
It depends on the priority for that specific area. Linear ceilings work well where continuous lighting integration and a reduced visual grid matter most, typically open-plan floors and corridors, while panel systems (clip-in or tegular) are usually the better fit for enclosed offices and conference rooms where a flush, uniform surface is the priority.
Yes. An open groove with acoustic backing behind it absorbs sound in a way similar to a perforated panel, which is useful in open-plan floors where there's a large uninterrupted ceiling span without partition walls to help break up reverberation.
Yes. Strip runs are commonly planned to align with linear LED fixtures so the lighting reads as part of the ceiling structure rather than a separate mounted element — this needs to be planned at the layout stage rather than adjusted after installation.
Wider strips with tighter grooves produce a more solid, continuous line that reads as more polished and corporate from a distance. Narrower strips with wider grooves show more of the plenum above and read as more open and industrial — the choice usually reflects the design tone the space is going for.
Yes, this is a common approach. Linear ceiling in open-plan and circulation areas paired with clip-in or tegular panels in enclosed offices and meeting rooms lets each area use the system best suited to its specific requirements.
