CONTACTEZ-NOUS DÈS MAINTENANT POUR RECEVOIR UN DEVIS RAPIDE, UN SUPPORT D'ÉCHANTILLONNAGE ET UNE GARANTIE DE SERVICE D'INGÉNIERIE.

Aluminum Ceiling Container Loading: m² per 20GP and 40HQ

Aluminum ceiling container loading depends on the product. A 40HQ container holds about 6,500–7,200 m² of 600 × 600 tiles, 4,800–5,500 m² of strip ceiling, 4,200–4,800 m² of baffles and 2,100–2,400 m² of 2.0 mm solid panels. A 20GP holds roughly 40% of that.

This guide gives typical figures for each product, shows how we pack them, and explains how to plan your shipment so you do not pay for empty space.

How many m² fit in a 20GP and a 40HQ

Product

20GP (m²)

40HQ (m²)

Clip-in / lay-in tiles, 600 × 600 mm

2,800–3,200

6,500–7,200

Strip ceiling, 300 × 1200 mm

2,200–2,600

4,800–5,500

Baffle ceiling, 50 × 100 mm profile

1,800–2,200

4,200–4,800

Solid aluminum panel, 2.0 mm

850–1,000

2,100–2,400

These are typical shipping figures for standard specifications: interior ceilings 0.6–0.8 mm thick and solid panels 2.0–2.5 mm thick, packed on pallets. Thicker material, larger sizes, special shapes and wooden crates reduce the area per container. We confirm the exact number for your order before quoting.

How we load

We load cartons on pallets, protect the edges, and place the pallets so the container is full but safe. How each product is packed decides how much fits:

Product

Packing

Per carton

Per pallet

600 × 600 tiles

5-layer export carton

20 pcs = 7.2 m², 12–14 kg

16 cartons = 115 m², 220–240 kg

Strip ceiling 300 × 1200

Carton

14 pcs = 5.04 m², 14–16 kg

18 cartons = 90 m², 270–290 kg

Baffle 50 × 100

End caps, bubble film, extra-long carton

25 pcs = about 12 m², 18–20 kg

12 cartons = 140 m², 230–250 kg

Solid panel 2.0 mm

Wooden pallet, corner protectors, foam sheet

25–30 sheets per pallet = 30–35 m²

Extra wooden frame for large or shaped panels

A standard 20GP takes about 25 pallets of 600 × 600 tiles, and a 40HQ about 58 pallets.

4637a8d6cf9a7e349e737fcfe4171457

Weight: will you reach the limit first?

Most ceiling products are light and bulky, so the container fills up by volume long before it reaches a weight limit. Based on the pallet weights above:

Product

20GP, approx. cargo weight

40HQ, approx. cargo weight

600 × 600 tiles

5.5–6.0 t

12.8–13.9 t

Strip ceiling

6.6–8.4 t

14.4–17.7 t

Baffle ceiling

3.0–3.9 t

6.9–8.6 t

Solid panel 2.0 mm

about 4.6–5.4 t of sheet, plus pallets and packing

about 11.3–13.0 t of sheet, plus pallets and packing

Solid aluminum panels are the heaviest per m² (a 2.0 mm sheet weighs 5.4 kg/m²), but a full container is still far below normal container weight limits. Weight becomes a concern when you mix heavy and light products, or when a route or inland trucking leg limits a 20GP to around 21–22 tonnes of cargo. Ask your forwarder for the limit on your route before you book.

Loading tips

  • Use a 40HQ for long strips and baffles. Strips or baffles longer than about 2.4 m cannot stand upright in a 20GP, because its door is only about 2.28 m high. Laid flat they waste a lot of space. A 40HQ door is about 2.58 m high, so long pieces can stand upright.
  • Put heavy cargo at the bottom. In a mixed container, solid panels go on the floor and light tiles and baffles on top.
  • Balance left and right. Keep the weight difference between the two sides within about 500 kg.
  • Fill the gaps. Air bags between pallets stop cargo from moving at sea.
  • Think about LCL for small orders. When the cargo is under about 15 CBM and 5 tonnes, such as sample and top-up orders, shipping as LCL (shared container) usually costs less than a full container.
ff9cf19f29abaded6ac778281ee25fd7

Planning examples

  • A 3,000 m² office ceiling in 600 × 600 tiles fills about one 20GP.
  • A 5,000 m² airport concourse in strip ceiling needs about one 40HQ.
  • A 10,000 m² facade in 2.0 mm solid panels needs about five 40HQ.

For costs, see what aluminum ceilings cost in 2026. For solid panel weights and sizes, see aluminum panel thickness.

Before you ship

Before you place a large order, check these points:

  1. Ask for the carton and pallet size, so your forwarder can plan the container.
  2. Confirm the weight limit on your route.
  3. Check the pre-shipment inspection steps in our guide to how to import aluminum ceilings from China.
  4. Plan the unloading: pallets need a forklift, and long cartons need space to open the container door fully.

FAQ

How many m² of aluminum ceiling fit in a 40HQ?

About 6,500–7,200 m² of 600 × 600 tiles, 4,800–5,500 m² of strip ceiling, 4,200–4,800 m² of baffles and 2,100–2,400 m² of 2.0 mm solid panels.

Can I ship strip ceilings in a 20GP?

Yes, if the strips are shorter than about 2.4 m. For longer strips, use a 40HQ so they can stand upright.

When should I use LCL instead of a full container?

When the cargo is under about 15 CBM and 5 tonnes, for example samples or top-up orders. Above that, a full container is usually better value.

Will a full container of aluminum panels be too heavy?

Usually not. A full container of 2.0 mm solid panels carries about 5 tonnes of sheet in a 20GP and about 12 tonnes in a 40HQ, plus packing. Still, confirm the weight limit on your route with your forwarder.

Can you load different products in one container?

Yes. In a mixed container we put heavy solid panels on the bottom and light ceiling cartons on top, and balance the weight left to right.

Get a loading plan

Send us your product list, quantities and destination port. We will calculate how many containers you need and send a loading plan with your quotation. Browse our clip-in ceilings, strip ceilings, plafonds à déflecteurs et aluminum facade panels to start, or nous contacter directly.

Related reading: how to import aluminum ceilings from China · what aluminum ceilings cost in 2026 · aluminum panel thickness · strip ceilings

Précédent
Wood Grain Aluminum Ceiling: Heat Transfer Finish Guide
suivant
Parking Garage Ceiling: Open Cell vs U-Baffle
Intéressé(e) ?
Demander à être appelé par un spécialiste
Des solutions sur mesure pour vos projets de plafonds et de murs métalliques. Obtenez une solution complète pour vos projets personnalisés de plafonds et de murs métalliques. Bénéficier d'une assistance technique pour la conception, l'installation et la correction des plafonds et murs métalliques.